Legacy Moulded No. 46 Ogee Gutters


Our Legacy cast aluminium Moulded No. 46 Ogee gutters are available in various sizes and are supplied with a complete range of accessories, such as angles, outlets, stop ends and brackets.  True and faceted radius gutters are also available.

ARP Leicester
100 (4") 75 (3")
125 (5") 100 (4")
150 (6") 100 (4")
ARP Leicester
Number Item
1 Internal Stop End
2 90° External Angle
3 135° External Angle
4 Fascia Bracket
5 Running Outlet
6 Rise and Fall Bracket
7 90° Internal Angle
8 135° Internal Angle
9 Top-Fix Rafter Bracket
10 Gutter Length
11 Direct Fix Wedge
12 Union Connector
13 Side-Fix Rafter Bracket
14 External Stop End

 Composition and Manufacture

  • Aluminium alloy LM6 to BS5750:2008
  • Marine Grade
  • Special fittings can be provided
  • Mill finish or powdercoated to specific RAL/BS colour
  • Lightweight
  • 100x75mm & 125x100mm ranges are left hand systems; 150x100mm is a right hand system


When using brackets, Moulded No.46 Ogee gutters are supported on fascia brackets set out at 915mm maximum centres no further than 300mm from a joint, please allow one extra bracket per fitting.

For Direct Fix Moulded No.46 Ogee gutter a direct fix wedge is located behind the pre-drilled holes and secured at 915mm centres with M5x25mm stainless steel countersunk screws.

The fascia brackets should be set out to any pre-determined fall taking note of the position of any fittings, such as outlets and angles beforehand. Brackets should be fixed using M5x25mm stainless steel countersunk screws (dependant on substrate).

Top fixing or side fixing rafter brackets are also available and centres may be governed by the roof timbers.

Rise & fall brackets driven into the masonry are recommended to be fixed at 915mm maximum centres.

Touch up paint is supplied to coat all cut edges.

Full fitting instructions are supplied with every delivery.