|1||Universal Stop End|
|2||135° Universal Angle|
|6||Rise and Fall Bracket|
|7||90° Universal Angle|
|8||Side Fix Rafter Bracket|
|10||Top-Fix Rafter Bracket|
Composition and Manufacture
- Aluminium alloy 6063 to BS1474:1972
- Fittings made by mitre cut and welding
- 100% recyclable
- Special fittings can be provided
- Mill finish or powder coated to specific RAL/BS colour
Gutter to be fitted on Sentinel fascia, rafter top-fix, rafter side-fix or rise and fall brackets at 750mm centres with an additional bracket required for all running outlets and angles no further than 375mm from joint.
Expansion gaps of 3-4mm to be left between butt ends.
Joints to be made by applying two beads of Arbosil 1096 Low Modulus Sealant onto each side of the joint, offering up the union connector and securing using M6x20mm aluminium bolts, neoprene washers and nuts.
Full fitting instructions are supplied with every delivery.