|1||Internal Stop End|
|2||90° External Angle|
|3||135° External Angle|
|6||Rise and Fall Bracket|
|7||90° Internal Angle|
|8||135° Internal Angle|
|9||Side Fix Rafter Bracket|
|12||Top-Fix Rafter Bracket|
|13||External Stop End|
Composition and Manufacture
- Aluminium alloy LM6 to BS5750:2008
- Marine Grade
- 100% recycled aluminium and 100% recyclable
- Special fittings can be provided
- Mill finish or powdercoated to specific RAL/BS colour
Cast half round gutters have fascia brackets which are set out at 915mm maximum centres, no further than 300mm from a joint – please allow one extra bracket per fitting.
The fascia brackets should be set out to any pre-determined fall, taking note beforehand of the position of any fittings, such as outlets and angles. Brackets should be fixed using M5x25mm stainless steel countersunk screws (dependant on substrate).
Rafter brackets are also available, whose centres may be governed by the roof timbers. Rise and fall brackets driven into the masonry are recommended to be at 915mm maximum centres.
Touch up paint is supplied to coat all cut edges.
Full fitting instructions are supplied with every delivery.