Home > ProductsExtruded Aluminium Gutter Systems > Extruded Aluminium Gutter – Beaded Half Round “Snap Fit”

Extruded Aluminium Gutter - Beaded Half Round "Snap Fit"

Our 'Sentinel' extruded aluminium Beaded Half Round "Snap fit" gutters are available in various sizes and are supplied with a complete range of accessories such as angles, outlets, stop ends and various brackets.

AB
11259
12565
15079

All dimensions in mm.

NumberItem
1Universal Stop End
2135° Universal Angle
3Fascia Bracket
4Union Connector
5Running Outlet
6Rise and Fall Bracket
790° Universal Angle
8Side Fix Rafter Bracket
9Gutter length
10Top Fix Rafter Bracket

Gutter Length

Gutter SizeAB
1120.5, 1.0, 1.5, 2.0, 2.5, 3.059
1250.5, 1.0, 1.5, 2.0, 2.5, 3.065
1500.5, 1.0, 1.5, 2.0, 2.5, 3.079
'Legacy' Half-round gutter

90° Universal Angle

Gutter SizeAB
112150293
125150308
150150334
'Legacy' Half-round gutter

135° Universal Angle

Gutter SizeAB
100 (4")2675
114 (4½")2177
125 (5")2177
'Legacy' Half-round gutter

Running Outlet

Gutter SizeA
112300
125300
150300
'Legacy' Half-round gutter

Universal Internal Stopend

Gutter SizeA
11240
12540
15040
'Legacy' Half-round gutter

Internal Union Connector

Gutter SizeA
11280
12580
15080
'Legacy' Half-round gutter

Fascia Bracket

Gutter Stopend
Gutter SizeA
11294
12594
150113
'Legacy' Half-round gutter

Top Fix Rafter Bracket

Gutter SizeA
112230
125230
150230
'Legacy' Half-round gutter

Side Fix Rafter Bracket

Gutter SizeA
112230
125230
150230
'Legacy' Half-round gutter

Rise and Fall Bracket

Gutter SizeAB
112330200
125330200
150330200
'Legacy' Half-round gutter

Composition and Manufacture

  • Aluminium alloy 6063 to BS1474:1972
  • Fittings made by mitre cut and welding
  • 100% recyclable
  • Special fittings can be provided
  • Mill finish or powdercoated to specific RAL/BS colour
  • Lightweight

Installation

Gutter to be fitted on “Sentinel” fascia, rafter top-fix, rafter side-fix or rise and fall brackets at 750mm centres with an additional bracket required for all running outlets and angles no further than 375mm from joint.

Expansion gaps of 3-4mm to be left between butt ends.

Joints to be made with “Sentinel Snap Fit” union connectors and Arbosil 1096 Low Modulus Sealant.

Full fitting instructions are supplied with every delivery.