Home > ProductsExtruded Aluminium Gutter Systems > Extruded Aluminium Gutter – Vintage Ogee “Snap-fit”

Extruded Aluminium Gutter - Vintage Ogee "Snap-fit"

Our 'Sentinel' extruded aluminium Vintage Ogee "Snap-fit" gutters are available in various sizes and are supplied with a complete range of accessories such as angles, outlets, stop ends and various brackets.

AB
10075
125100
150100

All dimensions in mm.

NumberItem
1Left Hand Stop End
290° External Angle
3135° External Angle
4Internal Union Connector
5Fascia Bracket
6Running Outlet
7Rise and Fall Bracket
8Internal Union Connector
990° Internal Angle
10135° Internal Angle
11Top Fix Rafter Bracket
12Gutter Length
13Side Fix Rafter Bracket
14Right Hand Stop End

Gutter Length

Gutter SizeA
75 x 1000.5, 1.0, 2.0, 2.5, 3.0
125 x 1000.5, 1.0, 2.0, 2.5, 3.0
150 x 1000.5, 1.0, 2.0, 2.5, 3.0

90° External Angle

Gutter SizeA
75 x 100150
125 x 100150
150 x 100150

90° Internal Angle

Gutter SizeA
75 x 100236
125 x 100271
150 x 100306

135° External Angle

Gutter SizeA
75 x 100150
125 x 100150
150 x 100150

135° Internal Angle

Gutter SizeA
75 x 100193
125 x 100203
150 x 100213

Running Outlet

Gutter SizeA
75 x 100300
125 x 100300
150 x 100300

Stop End

Gutter SizeA
75 x 10040
125 x 10040
150 x 10040

Union Connector

Gutter SizeA
75 x 10080
125 x 10080
150 x 10080

Fascia Bracket

Gutter SizeA
75 x 100110
125 x 100110
150 x 100110

Top Fix Rafter Bracket

Gutter SizeA
75 x 100230
125 x 100230
150 x 100230

Side Fix Rafter Bracket

Gutter SizeA
75 x 100230
125 x 100230
150 x 100230

Rise and Fall Bracket

Gutter SizeAB
75 x 100330200
125 x 100330200
150 x 100330200

Composition and Manufacture

  • Aluminium alloy 6063 to BS1474:1972
  • Fittings made by cut/ mitre and welding
  • 100% recyclable
  • Special fittings can be provided
  • Mill finish or powdercoated to specific RAL/BS colour
  • Lightweight

Installation

Gutter to be fitted on “Sentinel” fascia, rafter top-fix, rafter side-fix or rise and fall brackets at 750mm centres with an additional bracket required for all running outlets and angles no further than 375mm from joint.

Expansion gaps of 3-4mm to be left between butt ends.

Joints to be made with “Sentinel Snap Fit” union connectors and Arbosil 1096 Low Modulus Sealant.

Full fitting instructions are supplied with every delivery.