Home > ProductsExtruded Aluminium Gutter Systems > Extruded Aluminium Gutter – Modern Ogee

Extruded Aluminium Gutter - Modern Ogee

Our 'Sentinel' extruded aluminium Modern Ogee gutters are available in various sizes and are supplied with a complete range of accessories,such as angles, outlets and stopends . Please note we do not offer brackets for this system as it is a direct fix option only.

AB
200150

All dimensions in mm.

NumberItem
1Left Hand Stopend
2135° External Angle
3135° Internal Angle
4Internal Union Connector
5Running Outlet
690° Internal Angle
790° External Angle
8Gutter length
9Right Hand Stopend

Gutter Length

Gutter Size A (m)
200 x 150mm0.5 , 1.0 , 2.0 , 2.5 , 3.0

90° External Corner

Gutter Size A
200 x 150mm150

90° Internal Angle

Gutter Size A
200 x 150mm325*

135° External Angle

Gutter Size A
200 x 150mm150

135° Internal Angle

Gutter Size A
200 x 150mm325*

Running Outlet

Gutter Size A
200 x 150mm300

Stop End

Gutter Size A
200 x 150mm40*

Union Connector

Gutter Size A
200 x 150mm80*

Composition and Manufacture

  • Aluminium alloy 6063 to BS1474:1972
  • Fittings made by cut/ mitre and welding
  • 100% recyclable
  • Special fittings can be provided
  • Mill finish or powdercoated to specific RAL/BS colour
  • Lightweight

Installation

Gutter to be fitted on “Sentinel” fascia, rafter top-fix, rafter side-fix or rise and fall brackets at 750mm centres with an additional bracket required for all running outlets and angles no further than 375mm from joint.

Expansion gaps of 3-4mm to be left between butt ends.

Joints to be made by applying two beads of Arbosil 1096 Low Modulus Sealant onto each side of the joint, offering up the union connector and securing using M6x20mm aluminium bolts, neoprene washers and nuts.

Full fitting instructions are supplied with every delivery.