Cast Aluminium Gutter - Plain Half Round

Our 'Legacy' cast aluminium Plain Half Round gutters are available in various sizes and are supplied with a complete range of accessories such as angles, outlets, stop ends and various brackets. True and faceted radius gutters are also available.

AB
100 (4")47
114 (4 ½")51
125 (5")59
150 (6")63

All dimensions in mm (Traditional size in inches)

NumberItem
1Internal Stop End
290° External Angle
3135° External Angle
4Running Outlet
5Rise and Fall Bracket
690° Internal Angle
7135° Internal Angle
8Side Fix Rafter Bracket
9Gutter Length
10Union Connector
11Top-Fix Rafter Bracket
12External Stop End

Gutter Lengths

Gutter lengths
Gutter SizeAB
100 (4")181545
114 (4 ½")181545
125 (5")181545
150 (6")181545
'Legacy' Half-round gutter

Gutter Stopend Internal/External

Gutter Stopend
Gutter SizeA
100 (4")45
114 (4 ½")45
125 (5")45
150 (6")45
'Legacy' Half-round gutter

Union Connector

Gutter Stopend
Gutter SizeA
100 (4")94
114 (4 ½")94
125 (5")94
150 (6")94
'Legacy' Half-round gutter

Outlets

Gutter Stopend
Gutter SizeA
100 (4")141
114 (4 ½")141
125 (5")141
150 (6")141
'Legacy' Half-round gutter

Gutter Angles 90 Degree External

Gutter Stopend
Gutter SizeAB
100 (4")3083
114 (4 ½")2177
125 (5")2177
150 (6")1462
'Legacy' Half-round gutter

Gutter Angles 90 Degree Internal

Gutter Stopend
Gutter SizeAB
100 (4")138191
114 (4 ½")143197
125 (5")70125
150 (6")164218
'Legacy' Half-round gutter

Gutter Angles 135 Degree External

Gutter Stopend
Gutter SizeAB
100 (4")2675
114 (4 ½")2177
125 (5")2177
150 (6")1369
'Legacy' Half-round gutter

Gutter Angles 135 Degree Internal

Gutter Stopend
Gutter SizeAB
100 (4")67120
114 (4 ½")70125
125 (5")70125
150 (6")72129
'Legacy' Half-round gutter

Fascia Brackets

Gutter Stopend
Gutter SizeA
100 (4")66
114 (4 ½")82
125 (5")90
150 (6")96
'Legacy' Half-round gutter

Side Fix Rafter Brackets

Gutter Stopend
Gutter SizeA
100 (4")230
114 (4 ½")230
125 (5")230
150 (6")230
'Legacy' Half-round gutter

Top Fix Rafter Brackets

Gutter Stopend
Gutter SizeA
100 (4")230
114 (4 ½")230
125 (5")230
150 (6")230
'Legacy' Half-round gutter

Rise and Fall Brackets

Gutter Stopend
Gutter SizeAB
100 (4")200300
114 (4 ½")200300
125 (5")200300
150 (6")200300
'Legacy' Half-round gutter

Composition and Manufacture

  • Aluminium alloy LM6 to BS5750:2008
  • Marine Grade
  • 100% recycled aluminium and 100% recyclable
  • Special fittings can be provided
  • Mill finish or powdercoated to specific RAL/BS colour
  • Lightweight

Installation

Cast half round gutters have fascia brackets which are set out at 915mm maximum centres, no further than 300mm from a joint – please allow one extra bracket per fitting.

The fascia brackets should be set out to any pre-determined fall, taking note beforehand of the position of any fittings, such as outlets and angles. Brackets should be fixed using M5x25mm stainless steel countersunk screws (dependant on substrate).

Rafter brackets are also available, whose centres may be governed by the roof timbers. Rise and fall brackets driven into the masonry are recommended to be at 915mm maximum centres.

Touch up paint is supplied to coat all cut edges.

Full fitting instructions are supplied with every delivery.

.