Home > Products > Aluminium Rainwater System Gutters > ‘Legacy’ Cast Aluminium Gutter System > Cast Aluminium Gutter – Moulded No.46 Gutter Ogee

Cast Aluminium Gutter - Moulded No.46 Ogee

Our ‘Legacy’ cast aluminium Moulded No 46 Ogee gutters come in various sizes and are supplied with a complete range of accessories including angles, outlets, stop ends and various fixing brackets . True & faceted radius gutters are also available.

AB
100 (4")75 (3")
125 (5")100 (4")
150 (6")100 (4")

All dimensions in mm (Traditional size in inches)

NumberItem
1Internal Stop End
290° External Angle
3135° External Angle
4Fascia Bracket
5Running Outlet
6Rise and Fall Bracket
790° Internal Angle
8135° Internal Angle
9Top-Fix Rafter Bracket
10Gutter Length
11Direct Fix Wedge
12Union Connector
13Side-Fix Rafter Bracket
14External Stop End

Gutter Length

Gutter lengths
Gutter SizeAB
100 x 75 (4 x 3")183045
125 x 100 (5 x 4")183045
150 x 100 (6 x 4")183045
'Legacy' Half-round gutter

Stop End

Gutter SizeA
100 x 75 (4 x 3")45
125 x 100 (5 x 4")45
150 x 100 (6 x 4")45

Union Connector

Gutter SizeA
100 x 75 (4 x 3")94
125 x 100 (5 x 4")94
150 x 100 (6 x 4")94
'Legacy' Half-round gutter

Outlet

Gutter Stopend
Gutter SizeA
100 x 75 (4 x 3")197
125 x 100 (5 x 4")197
150 x 100 (6 x 4")197
'Legacy' Half-round gutter

90° External Angle

Gutter Stopend
Gutter SizeAB
100 x 75 (4 x 3")2776
125 x 100 (5 x 4")2776
150 x 100 (6 x 4")2776
'Legacy' Half-round gutter

90° Internal Angle

Gutter SizeAB
100 x 75 (4 x 3")131183
125 x 100 (5 x 4")162208
150 x 100 (6 x 4")192240
'Legacy' Half-round gutter

135° External Angle

Gutter SizeAB
100 x 75 (4 x 3")2776
125 x 100 (5 x 4")2776
150 x 100 (6 x 4")2776
'Legacy' Half-round gutter

135° Internal Angle

Gutter SizeAB
100 x 75 (4 x 3")65119
125 x 100 (5 x 4")81137
150 x 100 (6 x 4")96142
'Legacy' Half-round gutter

Fascia Bracket

Gutter SizeA
100 x 75 (4 x 3")99
125 x 100 (5 x 4")120
150 x 100 (6 x 4")120
'Legacy' Half-round gutter

Side-Fix Rafter Bracket

Gutter SizeA
100 x 75 (4 x 3")230
125 x 100 (5 x 4")230
150 x 100 (6 x 4")230
'Legacy' Half-round gutter

Top-Fix Rafter Bracket

Gutter SizeA
100 x 75 (4 x 3")230
125 x 100 (5 x 4")230
150 x 100 (6 x 4")230
'Legacy' Half-round gutter

Rise and Fall Bracket

Gutter SizeAB
100 x 75 (4 x 3")200330
125 x 100 (5 x 4")200330
150 x 100 (6 x 4")200330

Direct Fix Wedge

Gutter SizeA
100 x 75 (4 x 3")65
125 x 100 (5 x 4")90
150 x 100 (6 x 4")90

Composition and Manufacture

  • Aluminium alloy LM6 to BS5750:2008
  • Marine Grade
  • Special fittings can be provided
  • Mill finish or powdercoated to specific RAL/BS colour
  • Lightweight
  • 100x75mm & 125x100mm ranges are left hand systems; 150x100mm is a right hand system

Installation

When using brackets, Moulded No.46 Ogee gutters are supported on fascia brackets set out at 915mm maximum centres no further than 300mm from a joint, please allow one extra bracket per fitting.

For Direct Fix Moulded No.46 Ogee gutter a direct fix wedge is locate behind the pre-drilled holes and secured at 915mm centres with M5x25mm stainless steel countersunk screws.

The fascia brackets should be set out to any pre-determined fall taking note of the position of any fittings, such as outlets & angles beforehand. Brackets should be fixed using M5x25mm stainless steel countersunk screws (dependant on substrate).

Top fixing or side fixing rafter brackets are also available and centres may be governed by the roof timbers.

Rise & fall brackets driven into the masonry are recommended to be fixed at 915mm maximum centres.

Touch up paint is supplied to coat all cut edges.

Full fitting instructions are supplied with every delivery.