Home > Products > Cast Iron Gutters and Rainwater Pipes > Cast Iron Gutter – Victorian Ogee

Cast Iron Gutter - Victorian Ogee

Our 'Britannia' cast iron Victorian Ogee gutters are available in various sizes and are supplied with a complete range of accessories such as angles, outlets, stopends and various brackets. True radius gutters are also available on request

AB
114 (4 ½")68.5
125 (5")73.5

All dimensions in mm (Traditional size in inches)

NumberItem
1Internal Left Hand Stopend
2External Left Hand Stopend
390° External Corner
4120° External Corner
5135° External Corner
6Fascia Bracket
7Running Outlet
8Rise & Fall Bracket with Stay
990° Internal Corner
10120° Internal Corner
11135° Internal Corner
12Side Fix Rafter Bracket
13Gutter Length
14Top Fix Rafter Bracket
15Union Connector
16Rise & Fall Bracket
17External Right Hand Stopend

Gutter Length

Gutter SizeAB
114 (4 ½")183045
125 (5")183045
'Legacy' Half-round gutter

Stopend LH/RH External

Gutter SizeA
114 (4 ½")50.5
125 (5")50.5

Stopend LH Internal

Gutter SizeA
114 (4 ½")50.5
125 (5")50.5
'Legacy' Half-round gutter

Union Connector

Gutter SizeA
114 (4 ½")98*
125 (5")98*

Running Outlet

Gutter SizeAB
114 (4 ½")126*234*
125 (5")125*234*

Gutter Angle 90 Degree External

Gutter SizeAB
114 (4 ½")136184
125 (5")160211

Gutter Angle 90 Degree Internal

Gutter SizeAB
114 (4 ½")136184
125 (5")160211

Gutter Angle 120 Degree External

Gutter SizeAB
114 (4 ½")2374
125 (5")2757
'Legacy' Half-round gutter

Gutter Angle 120 Degree Internal

Gutter SizeAB
114 (4 ½")94145
125 (5")106136
'Legacy' Half-round gutter

Gutter Angle 135 Degree External

Gutter SizeAB
114 (4 ½")2373
125 (5")2274
'Legacy' Half-round gutter

Gutter Angle 135 Degree Internal

Gutter SizeAB
114 (4 ½")74124
125 (5")78130
'Legacy' Half-round gutter

Fascia Bracket

Gutter SizeA
114 (4 ½")112
125 (5")117
'Legacy' Half-round gutter

Side Fix Rafter Bracket

Gutter SizeA
114 (4 ½")200
125 (5")200
'Legacy' Half-round gutter

Top Fix Rafter Bracket

Gutter SizeA
114 (4 ½")250
125 (5")250
'Legacy' Half-round gutter

Rise and Fall Bracket with Spike

Gutter SizeAB
114 (4 ½")300*140*
125 (5")300*140*
'Legacy' Half-round gutter

Rise & Fall Bracket with Spike & Stay

Gutter SizeAB
114 (4 ½")220140
125 (5")220140
'Legacy' Half-round gutter

Composition and Manufacture

  • Traditional Sand Cast Iron
  • Manufactured to BS460:1964
  • Bespoke fittings are available on request
  • Complies to all Listed Building, Heritage and Conservation requirements
  • Supplied Transit Primed or Factory applied wet paint finish in semi gloss black or to a specific RAL/BS colour on request
  • Life expectancy of over 100 years

Installation

Gutter to be fitted on “Britannia” brackets at 915mm centres with an additional bracket required for all running outlets and angles no further than 300mm from joint.

Rafter Top-Fix, Side-Fix or Rise and Fall brackets to be fitted onto rafter ends at a maximum centre of 915mm.

Expansion gaps of 3-4mm to be left within sockets.

For a Direct Fix option, gutter to be secured via pre-drilled holes at 915mm centres with M5x25mm stainless steel countersunk screws (dependant on substrate). Angles and outlets to be secured via the two pre-drilled holes on rear with M5x25mm stainless steel countersunk screws (dependant on substrate).    

Expansion gaps of 3-4mm to be left within sockets.

Joints to be made with “Britannia” gutter jointing kit or by applying two beads of Dow Corning 791 Sealant into the gutter socket and securing using M6x25mm bolts, neoprene washers and nuts.

Full fitting instructions are supplied with every delivery.